Close
|
3-Pleat Cotton Puggaree Hat Band |
---|
A new hat band can do wonders to freshen up any old hat, may we suggest the 3-Pleat Cotton Puggaree Hat Band by Capas Headwear. Featuring a multitude of great colors, this pug hat band is made of 100% cotton. Need to dress your hat up in something new? Look no further than the 3-Pleat Cotton Puggaree Hat Band - a fresh new look to your favorite hat! For best results, please follow all instructions for use (below). *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. Approx. 28" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Cotton Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or White. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a cotton sweatband? All this can be achieved with the Cap-Ban-Nu Cotton Hat Sizer ideal for sizing your hat down by half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1" Width 2.5 MM Thick Made of: 100% Cotton Jersey Size: One single sizer per pack. One Size Fits Most. |
Close
|
3-Pleat Satin Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Satin Puggaree Hat Band will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Satin 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Jungle Cruise Frank Captain Hat |
---|
With Disney's Jungle Cruise Frank Captain Hat you can step into the latest Disney film and become one of the crew. Featuring a classic fiddler's cap silhouette, the preferred hat style of riverboat captain, Frank Wolff. Includes all character-accurate details...including the faux leather hat band, metal side buttons and smooth faux leather bill. Approx. 2 1/2" Crown 2 1/2" Flexible Bill/Visor Made of: 100% Polyester Officially Licensed Faux Leather Hat Band Metal Side Buttons Faux Leather Bill Elasticized at Back Breathable Lining Size(s): One Size Fits Most - Fits comfortably up to size 7 3/8 (L). |
Close
|
Paisley 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a classic paisley print in varying colors, the Paisley 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Braided Leather Chin Strap |
---|
The Village Hat Shop presents the Braided Leather Chin Strap, the best method to ensure against the loss of your hat in wind or brush. Chin cord/straps, known in cattle country as stampede strings, provide security and assurance your hat will stay put. This chin cord/strap is practical, and the genuine leather looks fantastic, and built to last. Anyone who wants to keep their hat from blowing away will find it useful. Featuring a sliding wood bead that joins together two, four plait braids of leather, adjustable for total comfort. The Braided Leather Chin Strap works with a variety of hats, it's so easy to install, you'll want one for every hat you own. For best results, please follow all instructions for use (below). Instructions for Use: * Hold the cotter pins tightly together and push them through the stitching where the sweatband meets the body. * Pull the pins completely through the base of the sweatband until the braid is firmly against the sweatband. * Spread and bend the pins outward, as close to horizontal as possible. * Once bent, the pins provide a secure attachment of the chin strap. Approx. 22" Length (Excluding End Pins) Made of: 100% Leather Sliding Wood Bead Four Plait Braided Leather on Each Cord/Strap Metal D-Ring Attachments Metal Cotter Pins Size: One Size Fits Most |
Close
|
Wool Fashion Beret |
---|
Made of 100% wool, Village Hat Shop brings you the timeless Wool Fashion Beret in a wide assortment of colors. Sleek and simple, this seamless wool beret is topped with a small tonal tassel. Wear it tilted to either side of your head, centered or towards the back - the Wool Fashion Beret adds a touch of effortless French flair to your look! Approx. 11" Diameter Made of: 100% Wool Center Top Tassel Unlined Packable / Crushable Soft Size: One Size Fits Most - Fits up to size 7 1/8 (M) comfortably. For Bulk/Wholesale purchase of this hat, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Combed Twill MidPro FlexFit Fitted 7 3/8 - 8 Baseball Cap |
---|
The traditional 6-panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! This cap will fit up to a size 8! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 63% Polyster 34% Cotton 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size: Fitted - Fits sizes 7 3/8 (L) - 8 (XXXL) comfortably. |
Close
|
Cool and Dry FlexFit Fitted Baseball Cap |
---|
The traditional 6 panel mid-profile baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been fused with the polyester calocks tricot (mesh) to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the baseball cap. The Cool & Dry fabric and sweatband is a performance fabric that transfers moisture away from the wet parts of the baseball cap to areas that dry quickly. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT ballcap has the permacurv® bill or visor, so all the customizing work has been done and all you have to do is simply wear the cap! Approx. 3 1/2" Crown 2 3/4" Bill/Visor Made of: 97% Polyester 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size: One Size Fits Most - Fits sizes 6 7/8 (S) - 7 1/2 (XL). |
Close
|
George Washington Tricorn Hat |
---|
The George Washington Tricorn Hat by Elope is fit for any aspiring presidents out there! Featuring a black felt body, black grosgrain ribbon trim with a bow and faux silver button adornment strategically on the underbrim. This hat has a firm structure, sure to withstand any political speech or debate headed your way. Approx. 4 1/2" Round Crown 5 1/8" Structured Brim Made of: 100% Polyester Stiff Structure Black Felt Body Grosgrain Ribbon Binding On Brim Bow and Faux Silver Button Adornment Felt Sweatband - Hook and Loop Adjustable Sizer Unlined Size(s): One Size Fits Most - Fits up to size 7 5/8 (XL). Adjust size using inner hook and loop adjustable sizer. |
Close
|
Leather Stampede String Chin Strap |
---|
Time to switch out your worn out chin strap for a new reliable one? SunBody offers a leather chin cord/chin strap at an affordable price. Just thread through the existing chin strap/chin cord eyelets of your hat and tie the ends for a great looking two-in-one hat band and chin cord. Approx. 36" Length Made of: 100% Genuine Leather Adjustable Toggle Will Fit 1/8" Inside Diameter Eyelets Size: One Size - Use toggle to adjust chin strap length. Length may also be cut to fit your needs. |
Close
|
Tonal Cotton Blend Trucker Fitted Baseball Cap |
---|
The Flexfit® Tonal Cotton Blend Trucker Fitted Baseball Cap combines the ever-trendy trucker cap and the brand's signature spandex material for a one of a kind baseball cap. The mesh provides a responsive fit while the front panels are buckram-supported. A silver undervisor on the permacurv® bill/visor, and inner elasticized sweatband that stretches to fit, make this cap a simple wear! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 55% Polyester 43% Cotton 2% P.U. Spandex 6-Panel Design Mesh Back Panels (4) Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size(s): One Size Fits Most; Fits sizes 6 7/8 (S) - 7 1/2 (XL) comfortably. |
Close
|
Terry Cloth Hat Sizer |
---|
Please Note: This item sells as a SINGLE sizing strip in either Black or Tan. Made in the USA Find yourself in-between hat sizes? Need a better fit? Prefer the added comfort of a terry cloth sweatband? All this can be achieved with the Cap-Ban-Nu Terry Cloth Hat Sizer that can size your hat down half a size! For best results, please follow all instructions for use (below). Instructions: * Remove tape backing from product. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 10 3/4" Length 1 1/8" Width 5 MM Thick Made of: 100% Cotton Terry Cloth Size: One single sizer per pack. One Size Fits Most. |
Close
|
Cool and Dry Pique Mesh Fitted Baseball Cap |
---|
Want a comfortable, lightweight cap, the Flexfit® Cool and Dry Pique Mesh Fitted Baseball Cap is just the ticket thanks to the pique weave fabric. Cool and dry technology are sweat and moisture-wicking will keep you dry and refreshed on your next workout. A silver undervisor on the permacurv® bill/visor and inner elasticized sweatband that stretches to fit make this cap a simple wear! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 99% Polyester 1% P.U. Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size(s): One Size Fits Most; Fits sizes 6 7/8 (S) - 7 1/2 (XL) comfortably. |
Close
|
Felt Hat Brush |
---|
Information from the book Stetson Hats: "Whether vintage or modern, dust your hat daily with a soft-bristled brush. Stiff bristled brushes will tear the felt. Western stores frequently sell hatter's brushes for this dusting job." For the best maintenance and care of your hat(s), use a dark-colored brush for dark hats and a light colored brush for light hats. For best results, please follow all instructions for use (below) or watch the video here. Approx. 10 5/8" Length 3/4" - 1 1/4" Width Made of: 100% Maple Wood 100% Horse Hair Bristles Size: One Size Instructions for Use: * Brush counter-clockwise direction on the top of your hat. * Brush clockwise direction under the brim. * Brush daily. For Bulk/Wholesale purchase of this hat brush, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Youth Forte Mid Pro Trucker Snapback Baseball Cap |
---|
For something clean and simple, may we suggest Brixton Hats' Youth Forte Mid Pro Trucker Snapback Baseball Cap. Delivering a straightforward trucker hat perfect for any fun situation. The Forte maximizes comfort, with mesh paneling for breathability and a cotton sweatband to keep the hat snug on the head. Approx. 4 1/2" Crown 2 1/2" Flat Bill Made of: 60% Cotton 40% Polyester 6 Panel Crown 2 Fabric Front Panels 4 Back Mesh Panels Brixton Embroidered Patch Cotton Twill Sweatband Adjustable Snapback Strap Inseam Taping Unlined Size(s): Youth - Fits up to size 57 CM comfortably. |
Close
|
Veggie Fiber Straw Crochet Bucket Hat |
---|
The Veggie Fiber Straw Crochet Bucket Hat by Karen Keith is a great packable/crushable straw hat option made from 100% vegetable fiber! Available in two great colors, the Veggie Fiber Straw Crochet Bucket Hat features a crochet design that provides excellent breathability and style. An adjustable drawstring tie at the back can be used to personalize the fit of hat while its packable/crushable ability makes this a convenient hat to pack on any trip or outing. Completely vegetarian and vegan, the Veggie Fiber Straw Crochet Bucket Hat by Karen Keith is a fantastic straw hat choice you can feel good about! Approx. 3 3/4” Flat Crown 2 1/4” Overwelt Brim Made of: 100% Vegetable Fiber 100% Vegan/Vegetarian Breathable Crochet Design Adjustable Drawstring Tie Packable/Crushable Size: One Size Fits Most – Fits up to size 7 1/4 (L) comfortably. For Wholesale/B2B purchase of this style, click on the appropriate link below or call us at 1-888-847-4287. * BROWN * NAVY BLUE |
Close
|
Side Feather |
---|
The Brixton Hats Side Feather is the easiest accessory to dress up any hat, you just tuck it behind the existing hat band and voila! Grab a few more and bunch them together for a more dramatic look. This accessory works with felt, straw, dress, and western hats; you can customize it to suit your style. Approx. 3 1/2" - 4 1/2" Tall Made Of: 100% Feather (1) Decorative Side Feather Size(s): One Size |
Close
|
Polka Dot 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring classic white polka dots against black, brown or navy, the Polka Dot 3-Pleat Puggaree Hat Band by Capas Headwear will add a fresh new twist to your favorite hat. For best results, please follow all instructions for use (below). Approx. 26 1/2" Total Length, End to End 1 7/8" Width Made of: 100% Cotton 3-Pleat Puggaree Hat Band Cotton Twill Fabric Metal Hook and Anchor Size(s): One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Gard-More Water and Stain Repellent Aerosol Spray |
---|
Made in the USA Effective on a variety of items such as hats, jackets, boots, saddles and materials such as suede, smooth leather and fabric, Bickmore's Gard-More Water & Stain Repellent Aerosol Spray helps prevent damage from perspiration, rain and even grease stains. Gard-More features a light spray that dries quickly and will not change the color, tone or texture of your hat. It protects against scuffing and rub off, so it can be used on other items in your wardrobe. The repellent features no silicone which will not seal pore structure allowing leather, suede and fabric to breathe. Bickmore's Gard-More Water & Stain Repellent is environmentally safe and will not deplete the ozone layer. For best results, follow all manufacturer instructions for use (below). Size: (1) 5.5 Oz Aerosol Spray Can Manufacturer Instructions for Use: * Always check for color-fastness in a hidden area before using. Can be safely used on all colorfast suede, leather and fur/wool felt hats. Not for use on unfinished or rawhide leather. * All items must be clean and dry before treating. Use step 3 for leather & suede items or skip to step 4 for hats. * Leather & Suede Care: Spray can 6-9 inches from surface. Let dry at least 1 hour. Reapply periodically. * Hat Care: Brush hat counter-clockwise. Spray hat 6-9 inches from surface. Rebrush and let dry at least 1 hour. Reapply periodically. Please Note: This item can not be shipped to Canada due to shipping restrictions. |
Close
|
Pizza Hat |
---|
What do you take on your pizza? Topped with the works, Jacobson's Pizza Hat is deliciously pie-tastic! Wear it on National Pizza Day, February 9th, or just because! Who doesn't love pizza? As seen in the film, "Everything Everywhere All at Once". Approx. 14” Diameter Made of: 100% Polyester - Velour Finish Felt Toppings Elastic Base - Stretches to Fit Mesh Lining Size: One Size Fits Most, fits up to size 7 1/4 (L) comfortably. |
Close
|
Solar Curtain Protective Neck Flap |
---|
UPF 50+ Sun Protection Thanks to the Solar Curtain Protective Neck Flap from Sunday Afternoons, you'll be ready for all your future adventures! This accessory is a wonderful addition to any hat, thanks to its versatility with multiple wearing options. Over your hat, under it, or just worn on its own, this neck flap's sun resistance provides endless protection from the sun's harmful rays! Approx. 1" Headband 6 5/8" Cape Made of: 100% Bluesign® Certified Nylon 100% OEKO-TEX® Standard 100 Certified Polyester UPF 50+ Sun Protection Sunglass Lock PFC-Free Water Repellent Finish Multiple Wearing Options Coolcore® Wicking Sweatband Soft Neck Flap Protects Neck and Ears Size: One Size Fits Most - Fits up to size 7 3/4 (XXL) comfortably. |
Close
|
Starburst 3-Pleat Puggaree Hat Band |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a great new starburst print in varying colors, the Starburst 3-Pleat Puggaree Hat Band by Capas Headwear will give a colorful new twist to your favorite hat. Approx. 29" Total Length, End to End 1 7/8" Width Made of: 100% Polyester Instructions for Use: * Fasten the unfinished end of the pug band on the lower left side of the crown. * Wrap hatband around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hatband closest to the base of the crown. *Traditionally, men's hatbands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! |
Close
|
Cotton Beanie Hat |
---|
Handmade in the USA Did you know 40% of the body heat you lose, escapes through the top of your head?!?! Cover it with a Slumbercap Cotton Beanie Hat to warm your nights and brighten your days. The Slumbercap Cotton Beanie Hat is ideal for cold weather climates, joggers, campers, bikers while still being soft enough for chemotherapy patients and those affected by baldness. Slumbercap can be worn under a hat or with a scarf tied around it to frame the face with color. The Slumbercap is: * Soft and warm without being hot. * Snug and secure without being tight. * Comfortable enough to sleep in. * Attractive enough to be seen in. Approx. 6" Height, Flat 9 1/2" Width, Flat 1 3/4" Cuff Made of: 96% Cotton 4% Lycra Handmade in the USA Circle Top Crown Unlined for Maximum Breathability Machine Wash Warm Air Dry or Tumble Dry Size: One Size Fits Most - Stretches to fit up to 7 3/8 (L) comfortably. |
Close
|
Cotton Twill 3-Pleat Puggaree Hat Band - Khaki |
---|
Does your hat need a new look? A new hat band can do wonders to freshen up any old hat. Featuring a multitude of great colors, the 3-Pleat Puggaree Cotton Twill Hat Band by Village Hat Shop will give a fresh new look to your favorite hat. For best results, please follow all instructions for use (below). Approx. 28" Total Length, End to End 2" Width Made of: 100% Cotton Twill 3-Pleat Puggaree Hat Band Metal Hook and Anchor Size: One Size Fits Most - Wrap and anchor around your favorite hat for a fresh new look! *Traditionally, men's hat bands finish on the left side. This is where you should position the finished end of the hat band.* **Caution: Metal hook and anchor ends are very sharp - use care when handling.** Instructions for Use: * Fasten the unfinished end of the pug hat band on the lower left side of the crown. * Wrap pug hat band around the crown. * Re-position the starting end until the finished end is positioned at the mid-left side of hat. * Fasten the finished end of the pug band onto the hat (or existing hat band) closest to the base of the crown. |
Close
|
Poly Mesh Mustache Hat Sizer Pack - Black |
---|
Please Note: 1 pack contains 2 individual mustache hat sizers. Find yourself in-between hat sizes? Want your hat to fit your head a big snugger? Prefer the added comfort of a cushioned sweatband? All can be achieved with the Village Hat Shop's own Poly Mesh Hat Sizer Pack that helps size your hat down by 1/2 a size. Feels as cushioned as a pillow and available in black for your convenience. For best results, please follow all instructions for use (below). Instructions: * Peel off the backing from the sizer. * Stick to the front section of the hat's sweatband or whatever area the hat has a loose fit (front, back or sides). You can also place the sizer behind the sweatband, directly onto the hat, or onto the backside of the sweatband. * Discard the used strip when soiled and replace. Approx. 8 1/2" Length 2" Height Made of: 100% Polyester 2-Pack of Mesh Hat Sizers Size(s): One Size Fits Most - 1 pack contains 2 individual hat sizers. For Bulk/Wholesale purchase of this item, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Alison Faux Fur Pom Knit Beanie Hat |
---|
FINAL SALE A standard, thick pom beanie with a furry twist, we have Alison Faux Fur Pom Knit Beanie Hat by Brixton Hats. The Alison is super soft and cozy thanks to its thick, knitted design. To bump the coziness up a notch, a faux fur pom sits atop this Brixton Hats beanie. Pop it on this winter to add a little extra warmth to your outfit. Approx. 8" Height - Flat 6 7/8" Length - Flat Made of: 100% Acrylic Knitted Design Faux Fur Pom - Top Cuff Brixton Logo Side Tag Unlined Sizes(s): One Size Fits Most - Fits up to size 7 1/2 (XL) comfortably. FINAL SALE |
Close
|
Kids' Cotton Newsboy Cap |
---|
The Jaxon Youth Cotton Newsboy Cap is a great basic cap to have in any wardrobe at any age! Now available in a youth size, the Jaxon Youth Cotton Newsboy Cap makes the classic style available to younger Approx. 10" - 10 1/2" Diameter 2" Single Snap Bill Made of: 100% Cotton 8-Panel Cap with Center Button Tonal Grosgrain Ribbon Sweatband Satin Lining Size: Child's S/M and M/L. Age Inches CMS Hat Size Size 2 – 4 years 20 3/8 52 6 1/2 S/M 4 – 6 years 21 1/8 54 6 3/4 M/L For Wholesale/B2B purchase of this style, CLICK HERE or call us at 1-888-847-4287. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |