Close
|
Combed Twill MidPro FlexFit Fitted 7 3/8 - 8 Baseball Cap |
---|
The traditional 6-panel baseball cap has a fused buckram skeleton that forms the rounded athletic crown. Spandex has been woven into the cotton twill baseball cap to allow for maximum stretch and comfort. Each panel has a tonal thread sewn eyelet for ventilation. The inner elasticized sweatband stretches for fit, just like the cap. The fabric color under the bill/visor is a neutral gray. Each FLEXFIT baseball cap has the permacurv® bill/visor, so all the customizing work has been done and all you have to do is simply wear the cap! This cap will fit up to a size 8! Approx. 4" Crown 2 3/4" Bill/Visor Made of: 63% Polyster 34% Cotton 3% Spandex 6-Panel Design Buckram-Supported Front Panels (2) Top Button Sewn Eyelets Closed Back - Stretches to Fit Gray Undervisor Elastic Sweatband Unlined Size: Fitted - Fits sizes 7 3/8 (L) - 8 (XXXL) comfortably. |
Close
|
Bora Bora II Booney Hat |
---|
UPF 50+ Sun Protection You don’t have to be reeling ’em in in Bora Bora to enjoy the benefits of this ultra-breathable Omni-Shade® hat—but no complaints if you are, right? Featuring UPF 50 to block out 98% of harmful UVA and UVB rays and carrying the Skin Cancer Foundation’s seal of recommendation, the Bora Bora II Booney is definitely more than your average fishing hat. An Omni-Wick™ sweatband combines with a mesh vent panel (which is non UPF) to keep you cool and the sweat from dripping in your eyes. Quick-dry properties mean that even if this hat takes a dunk with you, it’ll be dry in no time. An adjustable toggle customizes the hat’s fit to your head. An adjustable chinstrap adds further security. Approx. 3" Crown - Front 4" Crown - Back 3" Floppy Brim Made of: Shell: 100% Textured Nylon Poplin Lining: 100% Polyester Omni-Shade UPF+ 50 Sun Protection Omni-Wick Sweatband and Mesh Adjustable Chin Strap Adjustable Drawcord with Strap Size: One Size Fits Most - Fits sizes 6 7/8 (S) - 7 1/2 (XL). |
Close
|
Kahl Felt Hat Stiffener Spray |
---|
Made in the USA Bickmore's Kahl Hat Stiffener is a special blend of stiffening agents formulated specifically to add the original body and stiffness back to felt hats. Proudly manufactured in the USA, Bickmore's Kahl Hat Stiffener outperforms all other hat stiffeners both in terms of its stiffening ability and gentleness to the tone and texture of the felt. Kahl Hat Stiffener will not affect the tone, texture or color of the hat. It will not turn yellow or flake off. Kahls Hat Stiffener will not affect future hat cleanings, shaping, or reblocking if used properly. For best results, follow all manufacturer instructions for use (below). Size: (1) 8 Fl Oz Spray Bottle Manufacturer Instructions for Use: * Always check for color-fastness in a hidden area before using. * Shake well. * Cover work area with a cloth. * Brush hat to clean surface. * Spray fine mist over entire area, holding bottle 8-10 inches away from the hat. * Allow to dry. * Use steam and reshape hat to desired style. Warning: If you do not steam this product into the hat it will sit on top of the fibers and leave a residue that will chip and flake. Steaming is a priority. Do not saturate, instead follow the procedure a few times. * Repeat above procedure if more body is desired. Please Note: This item can not be shipped to Canada due to shipping restrictions. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |