Close
|
Temple Fur Felt Fedora Hat |
---|
Made in the USA Stetson Royal Deluxe The Temple by Stetson is the top of the line, the royal deluxe quality fur felt dress hat manufactured by America's oldest and most respected hat company. This is one of the classic men's dress hats, seen (along with the Saxon and Chatham) in almost every movie released during Hollywood's golden age. Approx. 4" Center Pinch Crown 2 5/8" Snap Brim - Front/Back 2 3/8" Side Brims Made of: 100% Fur Felt Made in the USA 1 5/8" Wide Grosgrain Ribbon Hat Band with Bow Side Feather Stetson Side Pin Raw Edge Brim Leather Sweat Band Satin Lined Sizes: 6 3/4 through 8 (XS - XXXL); fits true to size. |
Close
|
Chatham Fur Felt Fedora Hat |
---|
Made in the USA Stetson Royal Deluxe The Chatham Fur Felt Fedora Hat by Stetson is the top of the line, Royal Deluxe quality dress hat manufactured by America's oldest and most respected hat company. This is one of the classic men's dress hats, seen (along with the Saxon and Temple) in almost every movie released during Hollywood's golden age. Approx. 4" Teardrop Crown 2 3/8" Snap Brim - Front/Back 2 1/4" Snap Brim - Sides Made of: 100% Fur Felt Made in the USA 1 1/8" Wide Grosgrain Ribbon Hat Band with Bow Side Feather Stetson Label Side Tab Raw Edge Brim Leather Sweatband Satin Lining Sizes: 6 7/8 through 8 (S - XXXL); fits true to size. |
Close
|
Wool Military Beret with Lambskin Band |
---|
Made in Canada The Wool Military Beret with Lambskin Band is proudly made in North America by the same manufacturer who supplies berets for the American military (Green Berets) as well as for the Royal Air Force of Great Britain. Berets have been a part of the military uniform since the 19th century and are still seen on troops throughout the world today. There are two unique design elements on this beret: * The semi-circle cardboard insert. This enables the wearer to create a sharp angle on the beret, as well as the spot to display your badge, emblem, or pin. * The leather binding (edge) encases a nylon web band that ends in a bow, this is used to adjust the size of the beret. Approx. 9 1/2" Diameter, Flat 3" Half-Moon Insert - Front Made of: 100% Wool Made in Canada Seamless Wool Beret Semi-circle Insert at Front Lambskin Leather Binding Adjustable Nylon Web Band Unlined Sizes: 6 3/4 (54cm, S) - 8 (64cm, XXXL); fits true to size. |
Close
|
Whippet Fur Felt Fedora Hat |
---|
Made in the USA Stetson Royal Deluxe Part of Stetson's Vintage Collection, the Stetson Whippet Fur Felt Fedora Hat is created with the finest Royal Deluxe Quality fur felt. Crafted with a smooth and delicate finish, this handsome fedora works well with many winter outfits, jackets and coats. The tonal grosgrain hat band wraps around the crown ending in a side bow and is finished with a side feather. Tonal grosgrain ribbon bounds the brim creating a sharp finished style. Approx. 4" C-Crown (Teardrop Crown) 2 3/8" - 2 1/2" Snap Brim Made of: 100% Fur Felt Made in the USA Grosgrain Ribbon Hat Band with Side Bow Grosgrain Ribbon Bound Edge Brim Stetson Side Pin Side Feather (Removable) Leather Sweatband Satin Lining Sizes: 6 7/8 (S) - 8 (XXXL); fits true to size. |
Close
|
Latte Florentine Milan Straw Fedora Hat |
---|
Made in the USA The Stetson Milan Straw Collection is composed of the very best straw and striking styles you won't find anywhere else. Extremely durable yet lightweight the Latte is one of those hats that simply feels right on the head. Trimmed with either tonal grosgrain ribbon for the black and white or rich chocolate brown for the sand color, the Stetson Latte Milan Straw Fedora Hat has a distinguished look. A bound edge, snap-down brim and sweatband complete the look of this fantastic spring/summer fedora hat. Approx. 4" Center Pinch Crown 1 7/8" Snap Brim Made of: 100% Florentine Milan Braid Straw Made in the USA Firm/Stiff Crown, Flexible Brim Grosgrain Ribbon Hat Band Grosgrain Ribbon Binding on Brim Cotton Sweatband Removable Stetson Side Pin Stetson Tip Logo Sizes: 6 7/8 (S) - 8 (XXXL); fits true to size. |
Close
|
Braided Leather Chin Strap |
---|
The Village Hat Shop presents the Braided Leather Chin Strap, the best method to ensure against the loss of your hat in wind or brush. Chin cord/straps, known in cattle country as stampede strings, provide security and assurance your hat will stay put. This chin cord/strap is practical, and the genuine leather looks fantastic, and built to last. Anyone who wants to keep their hat from blowing away will find it useful. Featuring a sliding wood bead that joins together two, four plait braids of leather, adjustable for total comfort. The Braided Leather Chin Strap works with a variety of hats, it's so easy to install, you'll want one for every hat you own. For best results, please follow all instructions for use (below). Instructions for Use: * Hold the cotter pins tightly together and push them through the stitching where the sweatband meets the body. * Pull the pins completely through the base of the sweatband until the braid is firmly against the sweatband. * Spread and bend the pins outward, as close to horizontal as possible. * Once bent, the pins provide a secure attachment of the chin strap. Approx. 22" Length (Excluding End Pins) Made of: 100% Leather Sliding Wood Bead Four Plait Braided Leather on Each Cord/Strap Metal D-Ring Attachments Metal Cotter Pins Size: One Size Fits Most |
Close
|
Felt Hat Brush |
---|
Information from the book Stetson Hats: "Whether vintage or modern, dust your hat daily with a soft-bristled brush. Stiff bristled brushes will tear the felt. Western stores frequently sell hatter's brushes for this dusting job." For the best maintenance and care of your hat(s), use a dark-colored brush for dark hats and a light colored brush for light hats. For best results, please follow all instructions for use (below) or watch the video here. Approx. 10 5/8" Length 3/4" - 1 1/4" Width Made of: 100% Maple Wood 100% Horse Hair Bristles Size: One Size Instructions for Use: * Brush counter-clockwise direction on the top of your hat. * Brush clockwise direction under the brim. * Brush daily. For Bulk/Wholesale purchase of this hat brush, CLICK HERE or call us at 1-888-847-4287. |
Close
|
Hard Plastic Single Hat Can Carrier |
---|
Please Note: The larger the hat size, the less space will remain for the brim. Hats larger than 7 3/8 (L) will have less brim space; these will still fit but the brim might need to be curled up a bit. You might consider the Western Hat Can for larger hat sizes and/or wider brims. Made in the USA If you travel and love to wear hats, this is the perfect companion for that beloved accessory. Traveling with hats can be a burden but the Hat Can/Carrier solves this problem. Your hat sits upon the inner hat rest that can be adjusted to fit any hat size via the wing-nuts on the bottom of the case. The hat then floats on the rest and the brim is safe from damage. This is a perfect house for your special hat. Approx. 10" Height 13" Width 11 1/4" Depth Made of: Hard Plastic Made in the USA Stiff Plastic - Protect & Store Your Hats! Handle - Lays Flat When Not in Use 2 Brass Buckles - Secure Lid in Place Crown Insert - Adjusts via Wingnuts Under Carrier Fits Hats up to 7" Crown Fits Hats up to 2 1/4" Brim Size: One Size - Fits hat up to 7" Crown and 2 1/4" Brim. |
Close
|
Hard Plastic Western Hat Can Carrier - Black |
---|
Please Note: This item may have gold OR silver tone clasps (gold tone is featured in the photos above). This feature is assorted and hardware color cannot be selected. Made in the USA Traveling with hats can be a burden but the Hard Plastic Western Hat Can/Carrier helps to solve this problem. Your hat sits upon the inner hat rest that can be adjusted to fit any hat size via the wing-nuts on the bottom of the case. The hat then floats on the rest and the brim is safe from damage. Approx. 9" Height 17" Width 16" Depth Made of: Hard Plastic Made in the USA Stiff Plastic - Protect & Store Your Hats! Handle - Lays Flat When Not in Use (2) Metal Clasps - Secure Lid in Place Crown Insert - Adjusts via Wingnuts Under Carrier Fits Hats up to 5" Crown Fits Hats up to 4" Brim Size: One Size - Fits hats up to 5" Crown and 4" Brim. |
Close
|
Six Baseball Cap Carrier |
---|
The Village Hat Shop Six Baseball Cap Carrier provides storage and transport, all in one. It provides headwear collectors a stylish way to transport, store, and protect their baseball caps. This crushproof neoprene case stores six caps and features four eyelets for ventilation, a removable shoulder strap for easy transport, and a convenient double zip closure. The elasticized adjustable straps ensures the lid remains open with ease, unclip the buckles for a complete open display. This is the perfect gift for the baseball cap collector who likes to travel with their favorites! Approx. 11" Height 9" Width 6" Depth Made of: 100% Polyester Fits Up to 6 Caps Stiff, Lightweight Neoprene - Crushproof Reinforced Rubber Handle - Top Metal Eyelets for Ventilation Closes via Double Zipper Adjustable, Removable Shoulder Strap Included Printed VillageHatShop.com Logo Size: One Size; fits up to 6 baseball caps. |
USA: 1-888-VHS-HATS (1-888-847-4287)
INT'L: +1 619-906-4440 Se habla español
Shop for Hats at VillageHatShop.com | Privacy Policy | Website Accessibility | Site Map
Copyright © 1999-2020 Village Hat Shop: The #1 Source for Hats Online
*ALL SPECIAL OFFERS AND DISCOUNTS
Excludes wholesale/B2B, Certain Brand Restrictions, Special Orders or Where Otherwise Noted.
CONTACT USWe are happy to help! |
1 (888) 847-4287Mon-Sun 8am-4:00pm |