T4MO Hikers Hat
T4MO Hikers Hat
400829
Share
Please Note: The Tilley Hat is designed to be worn low on your head and slightly loose. It should be held on by gravity, not by painful pressure on your forehead. Tilley suggests that you purchase your hat one size larger than your regular hat size.
UPF 50+ Sun Protection
You're ready for any adventure with the T4MO Hiker's Hat from Tilley! This outdoor hat is perfect for any trek along the trails, where your trusty hiking hat and boots lead you to a memorable adventure. The T4MO Hiker's Hat is ready to protect you from sun, wind, and rain. The best part? It's also very comfortable! The HyperKewl™ evaporative crown insert will help to provide temperatures that are approx. 10 to 15 degrees Fahrenheit cooler than ambient temperature; keeping you cool through those summer hikes.
Approx.
4" Ventilated Crown
3 1/2" Front/Back Brim
2 1/2" Side Brim
Made of:
98% Organic Cotton
2% Spandex
HyperKewl™ Evaporative Insert: 100% polyester mesh on the outside; interior is 53% polymer fibres; 47% cellulose fibres.
Features:
- Guaranteed for life.
- Certified sun protection - delivers an UPF of 50+.
- AMC Cancer Research Center has certified that the Tilley Hat blocks 98% of harmful UVA/UVB radiation.
- Underbrim reduces glare from most surfaces.
- Keep it on in windy conditions through the wind cord & size cinch system.
- Secure your Hat during a steep incline with rear brim loop for clip - loop also holds wind cords when not in use.
- Ventilation through mesh insert around the top of the crown.
- Hydrofil® anti-sweat band to wick away moisture.
- Lightweight, weighs 3.7 oz/108 grams.
- Buoyancy - stays afloat in water.
- DWR (Durable Water Repellent) Finish.
- bluesign® Approved.
- OEKO-TEX® Certification.
- Pocket in crown holds the insert and is made with mesh to help increase airflow for maximum evaporation, when HyperKewl™ is not in use, the pocket in the crown can be used to carry ID, cash or credit card.
- Temperature is regulated with HyperKewl™ Evaporative cooling insert: it absorbs & slowly releases water through evaporation to help ‘super charge’ the body’s natural cooling process.
- How to use your HyperKewl™ Evaporative Insert: Soak the insert in cold water for up to 5 minutes – insert into the Hat. The airflow through the mesh panel will start the evaporative cooling process. The cooling insert is expected to provide temperatures that are approx. 10 to 15 degrees Fahrenheit cooler than ambient temperature depending on airflow. It will not feel like an air-conditionner on your head – it will super charge the natural evaporation process to help you feel comfortable on the trail. High humidity will diminish the fabric’s ability to evaporate water.
- Remove HyperKewl™ insert before washing hat. Machine wash hat in cool water, delicate cycle or hand wash; Reshape & air-dry. Do not iron. Do not dry clean.
Sizes: 7(M) - 7 7/8 (XXL); Tilley recommends that you select one size larger. Please see size information at top.
To register your Tilley Hat, please click here to be directed to the Tilley online registration page. Please note Tilley no longer provides paper registration cards; registration must be done through their website.
To file an insurance claim, please click here to download the Tilley Hat Guarantee Claim Form (pdf).